HL7 Europe Base and Core FHIR IG
0.1.0-snapshot - draft 150

HL7 Europe Base and Core FHIR IG - Local Development build (v0.1.0-snapshot) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

## Resource Profile: BodyStructureEu - Detailed Descriptions

Page standards status: Draft | Maturity Level: 2

Definitions for the bodyStructure-eu resource profile.

- Key Elements Table
- Differential Elements Table
- Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. BodyStructure
Definition | Record details about an anatomical structure. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.
Short | Specific and identified anatomical structure
Control | 0..*
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | anatomical location
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. BodyStructure.implicitRules
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short | A set of rules under which this content was created
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
Control | 0..1
Type | uri
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. BodyStructure.text
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Short | Textual description of the body structureText summary of the resource, for human interpretation
Comments | Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Control | 0..1 This element is affected by the following invariants: dom-6
Type | Narrative
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | narrative, html, xhtml, display
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. BodyStructure.contained
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.
Short | Contained, inline Resources
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
Type | Resource
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | inline resources, anonymous resources, contained resources
8. BodyStructure.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Support | false
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. BodyStructure.identifier
Definition | Identifier for this instance of the anatomical structure.
Short | Body structure identifierBodystructure identifier
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..*
Type | Identifier
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. BodyStructure.active
Definition | Whether this body site is in active use.
Short | Whether this record is in active use
Comments | This element is labeled as a modifier because it may be used to mark that the resource was created in error.
Control | 0..1
Type | boolean
Is Modifier | true because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | false
Summary | true
Requirements | Need to be able to mark a body site entry as not to be used because it was created in error.
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. BodyStructure.morphology
Definition | The kind of structure being represented by the body structure at `BodyStructure.location`. This can define both normal and abnormal morphologies.
Short | Kind of Structure
Comments | The minimum cardinality of 0 supports the use case of specifying a location without defining a morphology.
Control | 0..1
Binding | The codes SHOULD be taken from For example codes, see SNOMEDCTMorphologicAbnormalities http://hl7.org/fhir/ValueSet/bodystructure-code|5.0.0 (preferred to `http://hl7.org/fhir/ValueSet/bodystructure-code` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. BodyStructure.includedStructure
Definition | The anatomical location(s) or region(s) of the specimen, lesion, or body structure.
Short | Included anatomic location(s)
Control | 1..*
Type | BackboneElement
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. BodyStructure.includedStructure.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. BodyStructure.includedStructure.structure
Definition | Code that represents the included structure.
Short | Code that represents the included structure
Control | 1..1
Binding | The codes SHOULD be taken from For example codes, see SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site|5.0.0 (preferred to `http://hl7.org/fhir/ValueSet/body-site` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. BodyStructure.includedStructure.laterality
Definition | Code that represents the included structure laterality.
Short | Code that represents the included structure laterality
Control | 0..1
Binding | The codes SHOULD be taken from For example codes, see Body Structure Laterality http://hl7.org/fhir/ValueSet/bodystructure-relative-location|5.0.0 (preferred to `http://hl7.eu/fhir/base-r5/ValueSet/siteLaterality-eu` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. BodyStructure.includedStructure.qualifier
Definition | Code that represents the included structure qualifier.
Short | Code that represents the included structure qualifier
Control | 0..*
Binding | The codes SHOULD be taken from For example codes, see Body Structure Qualifier http://hl7.org/fhir/ValueSet/bodystructure-relative-location|5.0.0 (preferred to `http://hl7.eu/fhir/base-r5/ValueSet/siteQualifier-eu` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. BodyStructure.patient
Definition | The person to which the body site belongs.
Short | Who this is about
Control | 1..1
Type | Reference(Patient)
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. BodyStructure
2. BodyStructure.text
Short | Textual description of the body structure
4. BodyStructure.identifier
Short | Body structure identifier
Note | This is a business identifier, not a resource identifier (see discussion)
6. BodyStructure.morphology
Binding | The codes SHOULD be taken from SNOMEDCTMorphologicAbnormalities (preferred to `http://hl7.org/fhir/ValueSet/bodystructure-code` )
8. BodyStructure.includedStructure
10. BodyStructure.includedStructure.structure
Binding | The codes SHOULD be taken from SNOMEDCTBodyStructures (preferred to `http://hl7.org/fhir/ValueSet/body-site` )
12. BodyStructure.includedStructure.laterality
Binding | The codes SHOULD be taken from Body Structure Laterality (preferred to `http://hl7.eu/fhir/base-r5/ValueSet/siteLaterality-eu` )
14. BodyStructure.includedStructure.qualifier
Binding | The codes SHOULD be taken from Body Structure Qualifier (preferred to `http://hl7.eu/fhir/base-r5/ValueSet/siteQualifier-eu` )

Guidance on how to interpret the contents of this table can be foundhere

0. BodyStructure
Definition | Record details about an anatomical structure. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.
Short | Specific and identified anatomical structure
Control | 0..*
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | anatomical location
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`) dom-6: A resource should have narrative for robust management (`text.`div`.exists()`)
2. BodyStructure.id
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Short | Logical id of this artifact
Comments | Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.
Control | 0..1
Type | id
Is Modifier | false
Must Support | false
Summary | true
4. BodyStructure.meta
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Short | Metadata about the resource
Control | 0..1
Type | Meta
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
6. BodyStructure.implicitRules
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short | A set of rules under which this content was created
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
Control | 0..1
Type | uri
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
8. BodyStructure.language
Definition | The base language in which the resource is written.
Short | Language of the resource content
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Control | 0..1
Binding | The codes SHALL be taken from AllLanguages (required to `http://hl7.org/fhir/ValueSet/all-languages|5.0.0` ) IETF language tag for a human language
Type | code
Is Modifier | false
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
10. BodyStructure.text
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Short | Textual description of the body structure
Comments | Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Control | 0..1 This element is affected by the following invariants: dom-6
Type | Narrative
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | narrative, html, xhtml, display
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
12. BodyStructure.contained
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.
Short | Contained, inline Resources
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
Type | Resource
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | inline resources, anonymous resources, contained resources
14. BodyStructure.extension
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | false
Must Support | false
Summary | false
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
16. BodyStructure.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Support | false
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. BodyStructure.identifier
Definition | Identifier for this instance of the anatomical structure.
Short | Body structure identifier
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..*
Type | Identifier
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
20. BodyStructure.active
Definition | Whether this body site is in active use.
Short | Whether this record is in active use
Comments | This element is labeled as a modifier because it may be used to mark that the resource was created in error.
Control | 0..1
Type | boolean
Is Modifier | true because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | false
Summary | true
Requirements | Need to be able to mark a body site entry as not to be used because it was created in error.
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
22. BodyStructure.morphology
Definition | The kind of structure being represented by the body structure at `BodyStructure.location`. This can define both normal and abnormal morphologies.
Short | Kind of Structure
Comments | The minimum cardinality of 0 supports the use case of specifying a location without defining a morphology.
Control | 0..1
Binding | The codes SHOULD be taken from SNOMEDCTMorphologicAbnormalities (preferred to `http://hl7.org/fhir/ValueSet/bodystructure-code` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
24. BodyStructure.includedStructure
Definition | The anatomical location(s) or region(s) of the specimen, lesion, or body structure.
Short | Included anatomic location(s)
Control | 1..*
Type | BackboneElement
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. BodyStructure.includedStructure.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Is Modifier | false
XML Format | In the XML format, this property is represented as an attribute.
Summary | false
28. BodyStructure.includedStructure.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | false
Summary | false
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
30. BodyStructure.includedStructure.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
32. BodyStructure.includedStructure.structure
Definition | Code that represents the included structure.
Short | Code that represents the included structure
Control | 1..1
Binding | The codes SHOULD be taken from SNOMEDCTBodyStructures (preferred to `http://hl7.org/fhir/ValueSet/body-site` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
34. BodyStructure.includedStructure.laterality
Definition | Code that represents the included structure laterality.
Short | Code that represents the included structure laterality
Control | 0..1
Binding | The codes SHOULD be taken from Body Structure Laterality (preferred to `http://hl7.eu/fhir/base-r5/ValueSet/siteLaterality-eu` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. BodyStructure.includedStructure.bodyLandmarkOrientation
Definition | Body locations in relation to a specific body landmark (tatoo, scar, other body structure).
Short | Landmark relative location
Control | 0..*
Type | BackboneElement
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
38. BodyStructure.includedStructure.bodyLandmarkOrientation.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Is Modifier | false
XML Format | In the XML format, this property is represented as an attribute.
Summary | false
40. BodyStructure.includedStructure.bodyLandmarkOrientation.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | false
Summary | false
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
42. BodyStructure.includedStructure.bodyLandmarkOrientation.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription
Definition | A description of a landmark on the body used as a reference to locate something else.
Short | Body ]andmark description
Control | 0..*
Binding | For example codes, see SNOMEDCTBodyStructures (example to `http://hl7.org/fhir/ValueSet/body-site|5.0.0` ) Select SNOMED code system values. Values used in a podiatry setting to decsribe landmarks on the body.
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition
Definition | An description of the direction away from a landmark something is located based on a radial clock dial.
Short | Clockface orientation
Control | 0..*
Binding | For example codes, see BodystructureBodyLandmarkClockFacePosition (example to `http://hl7.org/fhir/ValueSet/bodystructure-bodylandmarkorientation-clockface-position|5.0.0` ) Select SNOMED CT codes. A set of codes that describe a things orientation based on a hourly positions of a clock face.
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
48. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark
Definition | The distance in centimeters a certain observation is made from a body landmark.
Short | Landmark relative location
Control | 0..*
Type | BackboneElement
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
50. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Is Modifier | false
XML Format | In the XML format, this property is represented as an attribute.
Summary | false
52. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | false
Summary | false
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..*
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
56. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device
Definition | An instrument, tool, analyzer, etc. used in the measurement.
Short | Measurement device
Control | 0..*
Binding | For example codes, see DeviceType (example to `http://hl7.org/fhir/ValueSet/device-type|5.0.0` ) Codes to identify medical devices.
Type | CodeableReference(Device)
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
58. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value
Definition | The measured distance (e.g., in cm) from a body landmark.
Short | Measured distance from body landmark
Control | 0..*
Type | Quantity
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
60. BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation
Definition | The surface area a body location is in relation to a landmark.
Short | Relative landmark surface orientation
Control | 0..*
Binding | The codes SHOULD be taken from BodystructureLocationQualifier (preferred to `http://hl7.org/fhir/ValueSet/bodystructure-relative-location|5.0.0` ) Select SNOMED code system values. The surface area a body location is in relation to a landmark.
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
62. BodyStructure.includedStructure.spatialReference
Definition | XY or XYZ-coordinate orientation for structure.
Short | Cartesian reference for structure
Control | 0..*
Type | Reference(ImagingSelection)
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
64. BodyStructure.includedStructure.qualifier
Definition | Code that represents the included structure qualifier.
Short | Code that represents the included structure qualifier
Control | 0..*
Binding | The codes SHOULD be taken from Body Structure Qualifier (preferred to `http://hl7.eu/fhir/base-r5/ValueSet/siteQualifier-eu` )
Type | CodeableConcept
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
66. BodyStructure.excludedStructure
Definition | The anatomical location(s) or region(s) not occupied or represented by the specimen, lesion, or body structure.
Short | Excluded anatomic locations(s)
Control | 0..*
Type | Seettp://hl7.org/fhir/StructureDefinition/BodyStructure#BodyStructure.includedStructure
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
68. BodyStructure.description
Definition | A summary, characterization or explanation of the body structure.
Short | Text description
Comments | This description could include any visual markings used to orientate the viewer e.g. external reference points, special sutures, ink markings.
Control | 0..1
Type | markdown
Is Modifier | false
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
70. BodyStructure.image
Definition | Image or images used to identify a location.
Short | Attached images
Control | 0..*
Type | Attachment
Is Modifier | false
Must Support | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
72. BodyStructure.patient
Definition | The person to which the body site belongs.
Short | Who this is about
Control | 1..1
Type | Reference(Patient)
Is Modifier | false
Must Support | false
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)