PanCareSurPass Project HL7 FHIR Implementation Guide
0.1.0 - trial-use 150

This page is part of the PanCareSurPass Project HL7 FHIR Implementation Guide (v0.1.0: QA Preview) based on FHIR R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: DocumentReferencePcsp - Detailed Descriptions

Active as of 2023-01-26

Definitions for the DocumentReference-eu-pcsp resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. DocumentReference
2. DocumentReference.status
3. DocumentReference.docStatus
4. DocumentReference.type
Control10..1
BindingThe codes SHALL be taken from Document Type; other codes may be used where these codes are not suitableThe codes SHOULD be taken from DocumentTypeValueSet
Example
Passport:<valueCodeableConcept xmlns="http://hl7.org/fhir">
  <coding>
    <system value="http://hl7.eu/fhir/ig/pcsp/CodeSystem/cs-generic-eu-pcsp"/>
    <code value="surpass"/>
    <display value="Childhood Cancer Survivor Passport"/>
  </coding>
</valueCodeableConcept>
5. DocumentReference.subject
Control10..1
TypeReference(PatientPcsp|Patient|Practitioner|Group|Device)
6. DocumentReference.date
7. DocumentReference.relatesTo
8. DocumentReference.content
Control0..?
9. DocumentReference.content.attachment
Control0..?
10. DocumentReference.content.attachment.contentType
Control0..?
Example
PDF:application/pdf
11. DocumentReference.content.attachment.language
Control1..?
12. DocumentReference.content.attachment.data
Control1..?
13. DocumentReference.content.attachment.title
Control0..?
14. DocumentReference.content.attachment.creation
Control1..?
15. DocumentReference.context
Control0..?
16. DocumentReference.context.related
TypeReference(ConditionPrimaryCancerPcsp|ProcedureRadiotherapyPcsp|Resource)

Guidance on how to interpret the contents of this table can be found here.

1. DocumentReference
Definition

A reference to a document of any kind for any purpose. Provides metadata about the document so that the document can be discovered and managed. The scope of a document is any seralized object with a mime-type, so includes formal patient centric documents (CDA), cliical notes, scanned paper, and non-patient specific documents like policy text.

Control0..*
Summaryfalse
Comments

Usually, this is used for documents other than those defined by FHIR.

InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. DocumentReference.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. DocumentReference.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. DocumentReference.status
Definition

The status of this document reference.

Control1..1
BindingThe codes SHALL be taken from DocumentReferenceStatus

The status of the document reference.

Typecode
Is Modifiertrue
Summarytrue
Comments

This is the status of the DocumentReference object, which might be independent from the docStatus element.

This element is labeled as a modifier because the status contains the codes that mark the document or reference as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. DocumentReference.docStatus
Definition

The status of the underlying document.

Control0..1
BindingThe codes SHALL be taken from CompositionStatus

Status of the underlying document.

Typecode
Summarytrue
Comments

The document that is pointed to might be in various lifecycle states.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. DocumentReference.type
Definition

Specifies the particular kind of document referenced (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the document referenced.

Control10..1
BindingThe codes SHALL be taken from Document Type; other codes may be used where these codes are not suitableThe codes SHOULD be taken from DocumentTypeValueSet
TypeCodeableConcept
Summarytrue
Comments

Key metadata element describing the document that describes he exact type of document. Helps humans to assess whether the document is of interest when viewing a list of documents.

Example
Passport:<valueCodeableConcept xmlns="http://hl7.org/fhir">
  <coding>
    <system value="http://hl7.eu/fhir/ig/pcsp/CodeSystem/cs-generic-eu-pcsp"/>
    <code value="surpass"/>
    <display value="Childhood Cancer Survivor Passport"/>
  </coding>
</valueCodeableConcept>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. DocumentReference.subject
Definition

Who or what the document is about. The document can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of farm animals, or a set of patients that share a common exposure).

Control10..1
TypeReference(PatientPcsp|Patient|Practitioner|Group|Device)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. DocumentReference.date
Definition

When the document reference was created.

Control0..1
Typeinstant
Summarytrue
Alternate Namesindexed
Comments

Referencing/indexing time is used for tracking, organizing versions and searching.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. DocumentReference.relatesTo
Definition

Relationships that this document has with other document references that already exist.

Control0..*
TypeBackboneElement
Summarytrue
Comments

This element is labeled as a modifier because documents that append to other documents are incomplete on their own.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. DocumentReference.relatesTo.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. DocumentReference.relatesTo.code
Definition

The type of relationship that this document has with anther document.

Control1..1
BindingThe codes SHALL be taken from DocumentRelationshipType

The type of relationship between documents.

Typecode
Summarytrue
Comments

If this document appends another document, then the document cannot be fully understood without also accessing the referenced document.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. DocumentReference.relatesTo.target
Definition

The target document of this relationship.

Control1..1
TypeReference(DocumentReference)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. DocumentReference.content
Definition

The document and format referenced. There may be multiple content element repetitions, each with a different format.

Control1..*
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. DocumentReference.content.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. DocumentReference.content.attachment
Definition

The document or URL of the document along with critical metadata to prove content has integrity.

Control1..1
TypeAttachment
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. DocumentReference.content.attachment.contentType
Definition

Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.

Control0..1
BindingThe codes SHALL be taken from Mime Types

The mime type of an attachment. Any valid mime type is allowed.

Typecode
Summarytrue
Requirements

Processors of the data need to be able to know how to interpret the data.

Example
General:text/plain; charset=UTF-8, image/png
PDF:application/pdf
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. DocumentReference.content.attachment.language
Definition

The human language of the content. The value can be any valid value according to BCP 47.

Control10..1
BindingThe codes SHOULD be taken from CommonLanguages

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summarytrue
Requirements

Users need to be able to choose between the languages in a set of attachments.

Example
General:en-AU
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. DocumentReference.content.attachment.data
Definition

The actual data of the attachment - a sequence of bytes, base64 encoded.

Control10..1
Typebase64Binary
Summaryfalse
Requirements

The data needs to able to be transmitted inline.

Comments

The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. DocumentReference.content.attachment.title
Definition

A label or set of text to display in place of the data.

Control0..1
Typestring
Summarytrue
Requirements

Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.

Example
General:Official Corporate Logo
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. DocumentReference.content.attachment.creation
Definition

The date that the attachment was first created.

Control10..1
TypedateTime
Summarytrue
Requirements

This is often tracked as an integrity issue for use of the attachment.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. DocumentReference
Definition

A reference to a document of any kind for any purpose. Provides metadata about the document so that the document can be discovered and managed. The scope of a document is any seralized object with a mime-type, so includes formal patient centric documents (CDA), cliical notes, scanned paper, and non-patient specific documents like policy text.

Control0..*
Summaryfalse
Comments

Usually, this is used for documents other than those defined by FHIR.

2. DocumentReference.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. DocumentReference.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. DocumentReference.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. DocumentReference.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. DocumentReference.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. DocumentReference.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. DocumentReference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. DocumentReference.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. DocumentReference.masterIdentifier
Definition

Document identifier as assigned by the source of the document. This identifier is specific to this version of the document. This unique identifier may be used elsewhere to identify this version of the document.

Control0..1
TypeIdentifier
Summarytrue
Requirements

The structure and format of this Id shall be consistent with the specification corresponding to the formatCode attribute. (e.g. for a DICOM standard document a 64-character numeric UID, for an HL7 CDA format a serialization of the CDA Document Id extension and root in the form "oid^extension", where OID is a 64 digits max, and the Id is a 16 UTF-8 char max. If the OID is coded without the extension then the '^' character shall not be included.).

Comments

CDA Document Id extension and root.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. DocumentReference.identifier
Definition

Other identifiers associated with the document, including version independent identifiers.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. DocumentReference.status
Definition

The status of this document reference.

Control1..1
BindingThe codes SHALL be taken from DocumentReferenceStatus The status of the document reference
Typecode
Is Modifiertrue
Summarytrue
Comments

This is the status of the DocumentReference object, which might be independent from the docStatus element.

This element is labeled as a modifier because the status contains the codes that mark the document or reference as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. DocumentReference.docStatus
Definition

The status of the underlying document.

Control0..1
BindingThe codes SHALL be taken from CompositionStatus Status of the underlying document
Typecode
Summarytrue
Comments

The document that is pointed to might be in various lifecycle states.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. DocumentReference.type
Definition

Specifies the particular kind of document referenced (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the document referenced.

Control1..1
BindingThe codes SHALL be taken from Document Type; other codes may be used where these codes are not suitable
TypeCodeableConcept
Summarytrue
Comments

Key metadata element describing the document that describes he exact type of document. Helps humans to assess whether the document is of interest when viewing a list of documents.

Example
Passport:<valueCodeableConcept xmlns="http://hl7.org/fhir">
  <coding>
    <system value="http://hl7.eu/fhir/ig/pcsp/CodeSystem/cs-generic-eu-pcsp"/>
    <code value="surpass"/>
    <display value="Childhood Cancer Survivor Passport"/>
  </coding>
</valueCodeableConcept>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. DocumentReference.category
Definition

A categorization for the type of document referenced - helps for indexing and searching. This may be implied by or derived from the code specified in the DocumentReference.type.

Control0..*
BindingFor example codes, see DocumentClassValueSet High-level kind of a clinical document at a macro level
TypeCodeableConcept
Summarytrue
Alternate Namesclaxs
Comments

Key metadata element describing the the category or classification of the document. This is a broader perspective that groups similar documents based on how they would be used. This is a primary key used in searching.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. DocumentReference.subject
Definition

Who or what the document is about. The document can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of farm animals, or a set of patients that share a common exposure).

Control1..1
TypeReference(PatientPcsp)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. DocumentReference.date
Definition

When the document reference was created.

Control0..1
Typeinstant
Summarytrue
Alternate Namesindexed
Comments

Referencing/indexing time is used for tracking, organizing versions and searching.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. DocumentReference.author
Definition

Identifies who is responsible for adding the information to the document.

Control0..*
TypeReference(Practitioner|PractitionerRole|Organization|Device|Patient|RelatedPerson)
Summarytrue
Comments

Not necessarily who did the actual data entry (i.e. typist) or who was the source (informant).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. DocumentReference.authenticator
Definition

Which person or organization authenticates that this document is valid.

Control0..1
TypeReference(Practitioner|PractitionerRole|Organization)
Summaryfalse
Comments

Represents a participant within the author institution who has legally authenticated or attested the document. Legal authentication implies that a document has been signed manually or electronically by the legal Authenticator.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. DocumentReference.custodian
Definition

Identifies the organization or group who is responsible for ongoing maintenance of and access to the document.

Control0..1
TypeReference(Organization)
Summaryfalse
Comments

Identifies the logical organization (software system, vendor, or department) to go to find the current version, where to report issues, etc. This is different from the physical location (URL, disk drive, or server) of the document, which is the technical location of the document, which host may be delegated to the management of some other organization.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. DocumentReference.relatesTo
Definition

Relationships that this document has with other document references that already exist.

Control0..*
TypeBackboneElement
Summarytrue
Comments

This element is labeled as a modifier because documents that append to other documents are incomplete on their own.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. DocumentReference.relatesTo.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
23. DocumentReference.relatesTo.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
24. DocumentReference.relatesTo.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
25. DocumentReference.relatesTo.code
Definition

The type of relationship that this document has with anther document.

Control1..1
BindingThe codes SHALL be taken from DocumentRelationshipType The type of relationship between documents
Typecode
Summarytrue
Comments

If this document appends another document, then the document cannot be fully understood without also accessing the referenced document.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. DocumentReference.relatesTo.target
Definition

The target document of this relationship.

Control1..1
TypeReference(DocumentReference)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. DocumentReference.description
Definition

Human-readable description of the source document.

Control0..1
Typestring
Summarytrue
Requirements

Helps humans to assess whether the document is of interest.

Comments

What the document is about, a terse summary of the document.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. DocumentReference.securityLabel
Definition

A set of Security-Tag codes specifying the level of privacy/security of the Document. Note that DocumentReference.meta.security contains the security labels of the "reference" to the document, while DocumentReference.securityLabel contains a snapshot of the security labels on the document the reference refers to.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System
TypeCodeableConcept
Summarytrue
Requirements

Use of the Health Care Privacy/Security Classification (HCS) system of security-tag use is recommended.

Comments

The confidentiality codes can carry multiple vocabulary items. HL7 has developed an understanding of security and privacy tags that might be desirable in a Document Sharing environment, called HL7 Healthcare Privacy and Security Classification System (HCS). The following specification is recommended but not mandated, as the vocabulary bindings are an administrative domain responsibility. The use of this method is up to the policy domain such as the XDS Affinity Domain or other Trust Domain where all parties including sender and recipients are trusted to appropriately tag and enforce.

In the HL7 Healthcare Privacy and Security Classification (HCS) there are code systems specific to Confidentiality, Sensitivity, Integrity, and Handling Caveats. Some values would come from a local vocabulary as they are related to workflow roles and special projects.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. DocumentReference.content
Definition

The document and format referenced. There may be multiple content element repetitions, each with a different format.

Control1..*
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. DocumentReference.content.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
31. DocumentReference.content.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
32. DocumentReference.content.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
33. DocumentReference.content.attachment
Definition

The document or URL of the document along with critical metadata to prove content has integrity.

Control1..1
TypeAttachment
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. DocumentReference.content.attachment.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
35. DocumentReference.content.attachment.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on DocumentReference.content.attachment.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
36. DocumentReference.content.attachment.contentType
Definition

Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.

Control0..1
BindingThe codes SHALL be taken from Mime Types The mime type of an attachment. Any valid mime type is allowed
Typecode
Summarytrue
Requirements

Processors of the data need to be able to know how to interpret the data.

Example
General:text/plain; charset=UTF-8, image/png
PDF:application/pdf
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. DocumentReference.content.attachment.language
Definition

The human language of the content. The value can be any valid value according to BCP 47.

Control1..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summarytrue
Requirements

Users need to be able to choose between the languages in a set of attachments.

Example
General:en-AU
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. DocumentReference.content.attachment.data
Definition

The actual data of the attachment - a sequence of bytes, base64 encoded.

Control1..1
Typebase64Binary
Summaryfalse
Requirements

The data needs to able to be transmitted inline.

Comments

The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. DocumentReference.content.attachment.url
Definition

A location where the data can be accessed.

Control0..1
Typeurl
Summarytrue
Requirements

The data needs to be transmitted by reference.

Comments

If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.

Example
General:http://www.acme.com/logo-small.png
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. DocumentReference.content.attachment.size
Definition

The number of bytes of data that make up this attachment (before base64 encoding, if that is done).

Control0..1
TypeunsignedInt
Summarytrue
Requirements

Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all.

Comments

The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. DocumentReference.content.attachment.hash
Definition

The calculated hash of the data using SHA-1. Represented using base64.

Control0..1
Typebase64Binary
Summarytrue
Requirements

Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version).

Comments

The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see Provenance.signature for mechanism to protect a resource with a digital signature.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. DocumentReference.content.attachment.title
Definition

A label or set of text to display in place of the data.

Control0..1
Typestring
Summarytrue
Requirements

Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.

Example
General:Official Corporate Logo
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. DocumentReference.content.attachment.creation
Definition

The date that the attachment was first created.

Control1..1
TypedateTime
Summarytrue
Requirements

This is often tracked as an integrity issue for use of the attachment.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. DocumentReference.content.format
Definition

An identifier of the document encoding, structure, and template that the document conforms to beyond the base format indicated in the mimeType.

Control0..1
BindingThe codes SHOULD be taken from DocumentReferenceFormatCodeSet Document Format Codes
TypeCoding
Summarytrue
Comments

Note that while IHE mostly issues URNs for format types, not all documents can be identified by a URI.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. DocumentReference.context
Definition

The clinical context in which the document was prepared.

Control0..1
TypeBackboneElement
Summarytrue
Comments

These values are primarily added to help with searching for interesting/relevant documents.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. DocumentReference.context.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
47. DocumentReference.context.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
48. DocumentReference.context.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
49. DocumentReference.context.encounter
Definition

Describes the clinical encounter or type of care that the document content is associated with.

Control0..*
TypeReference(Encounter|EpisodeOfCare)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. DocumentReference.context.event
Definition

This list of codes represents the main clinical acts, such as a colonoscopy or an appendectomy, being documented. In some cases, the event is inherent in the type Code, such as a "History and Physical Report" in which the procedure being documented is necessarily a "History and Physical" act.

Control0..*
BindingFor example codes, see v3 Code System ActCode This list of codes represents the main clinical acts being documented
TypeCodeableConcept
Summaryfalse
Comments

An event can further specialize the act inherent in the type, such as where it is simply "Procedure Report" and the procedure was a "colonoscopy". If one or more event codes are included, they shall not conflict with the values inherent in the class or type elements as such a conflict would create an ambiguous situation.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. DocumentReference.context.period
Definition

The time period over which the service that is described by the document was provided.

Control0..1
TypePeriod
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. DocumentReference.context.facilityType
Definition

The kind of facility where the patient was seen.

Control0..1
BindingFor example codes, see FacilityTypeCodeValueSet XDS Facility Type
TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. DocumentReference.context.practiceSetting
Definition

This property may convey specifics about the practice setting where the content was created, often reflecting the clinical specialty.

Control0..1
BindingFor example codes, see PracticeSettingCodeValueSet Additional details about where the content was created (e.g. clinical specialty)
TypeCodeableConcept
Summaryfalse
Requirements

This is an important piece of metadata that providers often rely upon to quickly sort and/or filter out to find specific content.

Comments

This element should be based on a coarse classification system for the class of specialty practice. Recommend the use of the classification system for Practice Setting, such as that described by the Subject Matter Domain in LOINC.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. DocumentReference.context.sourcePatientInfo
Definition

The Patient Information as known when the document was published. May be a reference to a version specific, or contained.

Control0..1
TypeReference(Patient)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
55. DocumentReference.context.related
Definition

Related identifiers or resources associated with the DocumentReference.

Control0..*
TypeReference(ConditionPrimaryCancerPcsp|ProcedureRadiotherapyPcsp)
Summaryfalse
Comments

May be identifiers or resources that caused the DocumentReference or referenced Document to be created.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))