This page is part of the HL7 Europe Laboratory Report (v0.1.0: STU 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
Page standards status: Informative | Maturity Level: 2 |
Definitions for the LabReport logical model.
Guidance on how to interpret the contents of this table can be found here
0. LabReport | |
Definition | Laboratory Report. eHN guideline model. |
Short | A - Laboratory Report |
Logical Model | Instances of this logical model are not marked to be the target of a Reference |
2. LabReport.header | |
Definition | A.1 Report header data elements |
Short | A.1 Report header data elements |
Control | 1..1 |
Type | BackboneElement |
4. LabReport.header.subject | |
Definition | A.1.1 Identification of the patient/subject and A.1.2 Patient/subject related contact information |
Short | A.1.1 - A1.2 Patient/subject |
Control | 1..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Subject |
6. LabReport.header.payer | |
Definition | A.1.3 Health insurance and payment information |
Short | A.1.3 Health insurance and payment information |
Control | 0..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Payer |
8. LabReport.header.informationRecipient | |
Definition | A.1.4 Information recipient (intended recipient or recipients of the report, additional recipients might be identified by the ordering party, e.g. GP, other specialist), if applicable |
Short | A.1.4 Information recipient |
Control | 0..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Recipient |
10. LabReport.header.author | |
Definition | A.1.5 Author (by whom the Laboratory result report or a subset of its results was authored) |
Short | A.1.5 Author |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Author |
12. LabReport.header.legalAuthenticator | |
Definition | A.1.6 Legal authenticator (The person taking responsibility for the medical content of the document) |
Short | A.1.6 Legal authenticator |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/LegalAuthenticator |
14. LabReport.header.validator | |
Definition | A.1.7 Result validator |
Short | A.1.7 Result validator |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Validator |
16. LabReport.header.metadata | |
Definition | A.1.8 Laboratory report metadata |
Short | A.1.8 Laboratory report metadata |
Control | 1..1 |
Type | BackboneElement |
18. LabReport.header.metadata.documentId | |
Definition | Unique identifier of the document |
Short | A.1.8.0 Document Id |
Control | 1..1 |
Type | Identifier |
20. LabReport.header.metadata.type | |
Definition | A coded type of the document. Fixed value ""Laboratory report"" - Preferred system(s): LOINC |
Short | A.1.8.1 Document type |
Control | 1..1 |
Type | CodeableConcept |
22. LabReport.header.metadata.status | |
Definition | The status of the laboratory test result report. E.g., preliminary, final. - Preferred system(s): hl7:DiagnosticReportStatus |
Short | A.1.8.2 Document status |
Control | 1..1 |
Type | CodeableConcept |
24. LabReport.header.metadata.dateTime | |
Definition | Date and time of the result report creation. - Preferred system(s): ISO 8601 |
Short | A.1.8.3 Report date and time |
Control | 1..1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
26. LabReport.header.metadata.title | |
Definition | Document title, e.g. 'Laboratory Result report' |
Short | A.1.8.4 Document title |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
28. LabReport.header.metadata.studyType | |
Definition | Type (or types) of the laboratory study performed. - Preferred system(s): LOINC SNOMED CT |
Short | A.1.8.5 Study type |
Control | 0..* |
Type | CodeableConcept |
30. LabReport.header.metadata.custodian | |
Definition | Organisation that is in charge of maintaining the laboratory report |
Short | A.1.8.6 Report custodian |
Control | 0..1 |
Type | BackboneElement |
32. LabReport.header.metadata.confidentiality | |
Definition | Level of confidentiality of the document. Implicit value is normal. - Preferred system(s): hl7:Confidentiality |
Short | A.1.8.7 Confidentiality |
Control | 0..1 |
Type | CodeableConcept |
34. LabReport.header.metadata.language | |
Definition | Language in which the document is written. Language is expressed by the ISO language code.- Preferred system(s): BCP 47 |
Short | A.1.8.8 Language |
Control | 0..1 |
Type | CodeableConcept |
36. LabReport.header.metadata.version | |
Definition | Version of the document. |
Short | A.1.8.9 Version |
Note | This is a business versionId, not a resource version id (see discussion) |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
38. LabReport.order | |
Definition | A.2 Order information (Laboratory Result Report could respond to multiple test orders) A.3 Order reason (Laboratory Result Report could respond to multiple reasons) |
Short | A.2-A.3 Order |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Order |
40. LabReport.specimen | |
Definition | A.4 Specimen information |
Short | A.4 Specimen information |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/SpecimenLab |
42. LabReport.result | |
Definition | A.5 Results data elements |
Short | A.5 Results data elements |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Result |
Guidance on how to interpret the contents of this table can be found here
0. LabReport | |
Definition | Laboratory Report. eHN guideline model. |
Short | A - Laboratory Report |
Control | 0..* |
Is Modifier | false |
Logical Model | Instances of this logical model are not marked to be the target of a Reference |
2. LabReport.header | |
Definition | A.1 Report header data elements |
Short | A.1 Report header data elements |
Control | 1..1 |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
4. LabReport.header.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. LabReport.header.subject | |
Definition | A.1.1 Identification of the patient/subject and A.1.2 Patient/subject related contact information |
Short | A.1.1 - A1.2 Patient/subject |
Control | 1..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Subject |
8. LabReport.header.payer | |
Definition | A.1.3 Health insurance and payment information |
Short | A.1.3 Health insurance and payment information |
Control | 0..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Payer |
10. LabReport.header.informationRecipient | |
Definition | A.1.4 Information recipient (intended recipient or recipients of the report, additional recipients might be identified by the ordering party, e.g. GP, other specialist), if applicable |
Short | A.1.4 Information recipient |
Control | 0..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Recipient |
12. LabReport.header.author | |
Definition | A.1.5 Author (by whom the Laboratory result report or a subset of its results was authored) |
Short | A.1.5 Author |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Author |
14. LabReport.header.legalAuthenticator | |
Definition | A.1.6 Legal authenticator (The person taking responsibility for the medical content of the document) |
Short | A.1.6 Legal authenticator |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/LegalAuthenticator |
16. LabReport.header.validator | |
Definition | A.1.7 Result validator |
Short | A.1.7 Result validator |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Validator |
18. LabReport.header.metadata | |
Definition | A.1.8 Laboratory report metadata |
Short | A.1.8 Laboratory report metadata |
Control | 1..1 |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
20. LabReport.header.metadata.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
22. LabReport.header.metadata.documentId | |
Definition | Unique identifier of the document |
Short | A.1.8.0 Document Id |
Control | 1..1 |
Type | Identifier |
24. LabReport.header.metadata.type | |
Definition | A coded type of the document. Fixed value ""Laboratory report"" - Preferred system(s): LOINC |
Short | A.1.8.1 Document type |
Control | 1..1 |
Type | CodeableConcept |
26. LabReport.header.metadata.status | |
Definition | The status of the laboratory test result report. E.g., preliminary, final. - Preferred system(s): hl7:DiagnosticReportStatus |
Short | A.1.8.2 Document status |
Control | 1..1 |
Type | CodeableConcept |
28. LabReport.header.metadata.dateTime | |
Definition | Date and time of the result report creation. - Preferred system(s): ISO 8601 |
Short | A.1.8.3 Report date and time |
Control | 1..1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
30. LabReport.header.metadata.title | |
Definition | Document title, e.g. 'Laboratory Result report' |
Short | A.1.8.4 Document title |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
32. LabReport.header.metadata.studyType | |
Definition | Type (or types) of the laboratory study performed. - Preferred system(s): LOINC SNOMED CT |
Short | A.1.8.5 Study type |
Control | 0..* |
Type | CodeableConcept |
34. LabReport.header.metadata.custodian | |
Definition | Organisation that is in charge of maintaining the laboratory report |
Short | A.1.8.6 Report custodian |
Control | 0..1 |
Type | BackboneElement |
36. LabReport.header.metadata.confidentiality | |
Definition | Level of confidentiality of the document. Implicit value is normal. - Preferred system(s): hl7:Confidentiality |
Short | A.1.8.7 Confidentiality |
Control | 0..1 |
Type | CodeableConcept |
38. LabReport.header.metadata.language | |
Definition | Language in which the document is written. Language is expressed by the ISO language code.- Preferred system(s): BCP 47 |
Short | A.1.8.8 Language |
Control | 0..1 |
Type | CodeableConcept |
40. LabReport.header.metadata.version | |
Definition | Version of the document. |
Short | A.1.8.9 Version |
Note | This is a business versionId, not a resource version id (see discussion) |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
42. LabReport.order | |
Definition | A.2 Order information (Laboratory Result Report could respond to multiple test orders) A.3 Order reason (Laboratory Result Report could respond to multiple reasons) |
Short | A.2-A.3 Order |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Order |
44. LabReport.specimen | |
Definition | A.4 Specimen information |
Short | A.4 Specimen information |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/SpecimenLab |
46. LabReport.result | |
Definition | A.5 Results data elements |
Short | A.5 Results data elements |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Result |
Guidance on how to interpret the contents of this table can be found here
0. LabReport | |
Definition | Laboratory Report. eHN guideline model. |
Short | A - Laboratory Report |
Control | 0..* |
Is Modifier | false |
Logical Model | Instances of this logical model are not marked to be the target of a Reference |
2. LabReport.header | |
Definition | A.1 Report header data elements |
Short | A.1 Report header data elements |
Control | 1..1 |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
4. LabReport.header.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
6. LabReport.header.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on LabReport.header.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: |
8. LabReport.header.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
10. LabReport.header.subject | |
Definition | A.1.1 Identification of the patient/subject and A.1.2 Patient/subject related contact information |
Short | A.1.1 - A1.2 Patient/subject |
Control | 1..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Subject |
12. LabReport.header.payer | |
Definition | A.1.3 Health insurance and payment information |
Short | A.1.3 Health insurance and payment information |
Control | 0..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Payer |
14. LabReport.header.informationRecipient | |
Definition | A.1.4 Information recipient (intended recipient or recipients of the report, additional recipients might be identified by the ordering party, e.g. GP, other specialist), if applicable |
Short | A.1.4 Information recipient |
Control | 0..1 |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Recipient |
16. LabReport.header.author | |
Definition | A.1.5 Author (by whom the Laboratory result report or a subset of its results was authored) |
Short | A.1.5 Author |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Author |
18. LabReport.header.legalAuthenticator | |
Definition | A.1.6 Legal authenticator (The person taking responsibility for the medical content of the document) |
Short | A.1.6 Legal authenticator |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/LegalAuthenticator |
20. LabReport.header.validator | |
Definition | A.1.7 Result validator |
Short | A.1.7 Result validator |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Validator |
22. LabReport.header.metadata | |
Definition | A.1.8 Laboratory report metadata |
Short | A.1.8 Laboratory report metadata |
Control | 1..1 |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
24. LabReport.header.metadata.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
26. LabReport.header.metadata.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on LabReport.header.metadata.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: |
28. LabReport.header.metadata.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
30. LabReport.header.metadata.documentId | |
Definition | Unique identifier of the document |
Short | A.1.8.0 Document Id |
Control | 1..1 |
Type | Identifier |
32. LabReport.header.metadata.type | |
Definition | A coded type of the document. Fixed value ""Laboratory report"" - Preferred system(s): LOINC |
Short | A.1.8.1 Document type |
Control | 1..1 |
Type | CodeableConcept |
34. LabReport.header.metadata.status | |
Definition | The status of the laboratory test result report. E.g., preliminary, final. - Preferred system(s): hl7:DiagnosticReportStatus |
Short | A.1.8.2 Document status |
Control | 1..1 |
Type | CodeableConcept |
36. LabReport.header.metadata.dateTime | |
Definition | Date and time of the result report creation. - Preferred system(s): ISO 8601 |
Short | A.1.8.3 Report date and time |
Control | 1..1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
38. LabReport.header.metadata.title | |
Definition | Document title, e.g. 'Laboratory Result report' |
Short | A.1.8.4 Document title |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
40. LabReport.header.metadata.studyType | |
Definition | Type (or types) of the laboratory study performed. - Preferred system(s): LOINC SNOMED CT |
Short | A.1.8.5 Study type |
Control | 0..* |
Type | CodeableConcept |
42. LabReport.header.metadata.custodian | |
Definition | Organisation that is in charge of maintaining the laboratory report |
Short | A.1.8.6 Report custodian |
Control | 0..1 |
Type | BackboneElement |
44. LabReport.header.metadata.confidentiality | |
Definition | Level of confidentiality of the document. Implicit value is normal. - Preferred system(s): hl7:Confidentiality |
Short | A.1.8.7 Confidentiality |
Control | 0..1 |
Type | CodeableConcept |
46. LabReport.header.metadata.language | |
Definition | Language in which the document is written. Language is expressed by the ISO language code.- Preferred system(s): BCP 47 |
Short | A.1.8.8 Language |
Control | 0..1 |
Type | CodeableConcept |
48. LabReport.header.metadata.version | |
Definition | Version of the document. |
Short | A.1.8.9 Version |
Note | This is a business versionId, not a resource version id (see discussion) |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
50. LabReport.order | |
Definition | A.2 Order information (Laboratory Result Report could respond to multiple test orders) A.3 Order reason (Laboratory Result Report could respond to multiple reasons) |
Short | A.2-A.3 Order |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Order |
52. LabReport.specimen | |
Definition | A.4 Specimen information |
Short | A.4 Specimen information |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/SpecimenLab |
54. LabReport.result | |
Definition | A.5 Results data elements |
Short | A.5 Results data elements |
Control | 0..* |
Type | http://hl7.eu/fhir/laboratory/StructureDefinition/Result |